XK Command Off Road Switch Panel

Configurable/Programmable light switch functions exclusively via the XKcommand app. Unleash XKcommand, the off-road oracle that defies limits and takes control of your ride! This extraordinary off road switch, controlled by a cutting-edge bluetooth app, unveils a new age of control, personalization, and seamless synchronization of a vast array of 12v accessories. 

Elevate your off-road & on-the-road experience with different light control functions, compatibility with all XKGLOW lights and other 12v 3rd-party LED lights like light bar & other lights, and wireless control. Enjoy additional compatibility with 12v accessories like stereos, air rides, and so much more.

• Toggle On and Off modes with a light switch.
• Dimming mode available.
• 6 flash/strobe light patterns. Each lighting pattern has an opposite version to create a wig wag pattern.
• One light switch can control multiple channels. Each channel can perform the same or different pattern upon your choice.
• Can be set as a momentary switch. (Linked channel turns off when the button is released.)
• Assign an icon, image, or name for each button/switch to easily identify the configured function.

Key Features:

• Dual control with the switch panel & Bluetooth-controlled XKcommand app. Both methods work in sync.
• Switch panel buttons/switches can be configured/programmed with a mobile app.
• 3 programmable sensor wires to trigger actions by tapping into the vehicle wire source.
• Wire all your lighting accessories into the XKcommand Hub.
• Customizable RGB switch panel backlight. DIY button with icons, images, or text.
• Configurable & resettable fuse for each output channel.
• Low voltage auto-shutoff protection.
• Eight 15A output channels. Channels can be combined in the app for higher amperage output.
• Compatible with most 12V offroad lighting accessories such as light bars, cube lights, etc.
• Waterproof with an IP67 rating. 3 years warranty. Easy installation.

Tech Specs

• Max current per channel: 15A. To reach higher amp, link multiple channels under control of one button.
• Input Voltage: 9-16 volts
• Sensor wire input: 9-16V for red, green and blue wires (programmable sensor wires). 3-16V for white wire (ignition sensor wire)
• Common 12V system.
• Bluetooth 4.0 Low Energy
• Android 4.4 Version or higher / iOS 9 or higher required

*if you use XKcommand with a winch, hoist, or other electric motor, you MUST use a relay. The motor cannot be directly connected to the XKcommand Hub*